PLC Communication

The OV20i vision system supports real-time communication with EtherNet/IP-based PLCs. This guide explains how to configure cyclic I/O connections, map data structures, and use Overview’s Node-RED tools to access both global and ROI-level inspection ...

This section outlines the process for changing the recipe in the camera using PLC logic. Each step and corresponding action are detailed to ensure proper integration and functionality. Timing Diagram The timing diagram illustrates the sequen...

Connect the camera to the PLC of your choice by following this article. Camera Trigger Settings Make sure to set the PLC Trigger as a trigger on the camera side ( Imaging Setup > Photometric Control ). Timing Diagram The tim...

Setting up OV20i in Rockwell Studio 5000 (Connections) After enabling Ethernet/IP functions within the OV20i software, you're prepared to incorporate module(s) for the OV20i into your PLC project and verify communication. Launch Studio 5000 and ...

This guide will walk you through setting up PROFINET on your OV20i. Enabling PROFINET The first step will be to connect to the OV20i software and navigate to the Industrial Ethernet menu on the left-hand side. From this menu, complete the...