OV80i 上的 Reset button
This page explains the purpose of the Reset button on the OV80i camera and when to use it during basic troubleshooting.
备注
There is no recovery mode or long-press behavior. A short press simply restarts the camera.
Where Is the Button?
The Reset button is located on the top panel of the OV80i.
备注
- Micro-USB 提供在以太网配置无关的情况下对 UI 的紧急访问，地址为
http://192.168.55.1*。 - HDMI 提供一个只读 HMI 显示屏（1920×1080），用于实时可视化。
- USB-A/C 预留用于未来/支持用途，不提供 UI 连接。
What the Reset Button Does
| Action | Press Duration | Function | Is It Safe for Customer Use? |
|---|---|---|---|
| Reset | Short press (tap) | Restarts the camera software | ✅ Yes |
| Recovery | ❌ Not Supported | No recovery function exists | 🚫 Not applicable |
When to Use the Reset Button
- The camera UI becomes unresponsive
- Camera stops responding to triggers or inspection cycles
- You've changed a setting (like IP address) that needs a restart
What Happens Internally
- The camera reboots the operating system
- All inspection recipes, logs, and network settings remain intact
- No data is erased
What Not to Expect
- 没有出厂重置
- 没有固件刷新
- 没有隐藏的恢复模式
This button 仅重新启动系统, 类似于断开并重新连接电源 — 但更安全。