AI-POWERED DOCS
What do you want to know?
Digital Input Setup
This guide shows you how to configure the OV80i's digital inputs to initiate camera inspections from external devices. The camera has 1 hardware input and 2 digital inputs that detect True/False signals from sensors, switches, PLCs, or other automation equipment.
When to Use Digital Inputs: Automated production lines with sensors, manual control switches, PLC-controlled inspections, conveyor belt integration, or any external device that needs to signal the camera to start an inspection.
Prerequisites
- OV80i camera system set up and connected
- Active recipe configured with imaging and inspection setup
- External input device (sensor, switch, PLC output, etc.)
- Understanding of NPN digital input wiring
- M12 connector access for wiring
Digital Input Specifications
The OV80i provides 1 trigger input and 2 digital inputs accessible via the M12 connector:
| Input | Pin # | Wire Color | Function |
|---|---|---|---|
| Digital Input 0 | 5 | Configurable control input | |
| Digital Input 1 | 1 | Configurable control input | |
| Hardware Input | 10 | Primary hardware input |
Operating Logic:
- NPN Input Type: Common ground switching
- True (ON): Input connected to ground (0V)
- False (OFF): Input open or at 24V
- Signal Voltage: 24V DC nominal
Digital Input Wiring
NPN Wiring Configuration
Standard NPN sensor connection:
+24V ──→ Sensor Power
Ground ──→ Common Ground
Sensor Output ──→ Camera Digital Input Pin
The OV80i uses NPN inputs, which means the input goes True when connected to ground.
Use Node-RED to access the signal from the input nodes.